» google_pagerank()
  » preg_replace()
  » imagecreatefrompng()
  » site_pageranks()
  » imagepng()
  » imagedestroy()
  » imagestring()
  » imagecolorallocate()
  » htmlentities()
  » preg_match()
  » fopen()
  » header()
  » getimagesize()
  » preg_match_all()
  » session_start()
  » htmlspecialchars()
  » ob_start()
  » ob_flush()
  » strstr()
  » flush()
  » strpos()
  » setcookie()
  » str_replace()
  » array2vars()
  » nl2br()
  » preg_split()
  » ereg()
  » ereg_replace()
  » urlencode()
  » readgzfile()

Become a sponsor for $15/month. Link is sitewide - PR5 homepage, 20+ PR4 pages, 90+ PR3 pages. Email dave[AT]icemelon[D0T]c0m.

(PHP 4 >= 4.0.4, PECL)

qdom_tree -- Creates a tree of an XML string

Description

QDomDocument qdom_tree ( string doc )

Warning

This function is EXPERIMENTAL . The behaviour of this function, the name of this function, and anything else documented about this function may change without notice in a future release of PHP. Use this function at your own risk.

Warning

This function is currently not documented; only the argument list is available.

CXII. Radius

Introduction

This package is based on the libradius of FreeBSD. This PECL adds full support for Radius Authentication ( RFC 2865 ) and Radius Accounting ( RFC 2866 ). This package is available for Unix (tested on FreeBSD and Linux) and for Windows.

Installation

Howto install the package?

untar the package (usually into php4/ext)

rename radius-x.x to radius

run ./buildconf in php4

run ./configure --enable-radius

make; make install

or if you would like to have it as .so:

untar the package

run phpize in the radius-x.x directory

run ./configure in the radius-x.x directory

make; make install

For windows I recommend to use the php_radius.dll from http://snaps.php.net/ . You may obtain this unbundled PECL extension from the various PECL snaps pages (select the appropriate repository for your version of PHP): PECL for PHP 4.3.x , PECL for PHP 5.0.x or PECL Unstable .

Predefined Constants

The constants below are defined by this extension, and will only be available when the extension has either been compiled into PHP or dynamically loaded at runtime.

RADIUS_ACCESS_REQUEST ()

Authentication Request

RADIUS_ACCESS_ACCEPT ()

Access accepted

RADIUS_ACCESS_REJECT ()

Access rejected

RADIUS_ACCOUNTING_REQUEST ()

Accounting request

RADIUS_ACCOUNTING_RESPONSE ()

Accounting response

RADIUS_ACCESS_CHALLENGE ()

Accsess challenge

RADIUS_USER_NAME ( string )

Username

RADIUS_USER_PASSWORD ( string )

Password

RADIUS_CHAP_PASSWORD ( string )

Chap Password: chappass = md5(ident + plaintextpass + challenge)

RADIUS_NAS_IP_ADDRESS ( string )

NAS IP-Adress

RADIUS_NAS_PORT ( int )

NAS Port

RADIUS_SERVICE_TYPE ( int )

Type of Service, one of:

RADIUS_LOGIN RADIUS_FRAMED RADIUS_CALLBACK_LOGIN RADIUS_CALLBACK_FRAMED RADIUS_OUTBOUND RADIUS_ADMINISTRATIVE RADIUS_NAS_PROMPT RADIUS_AUTHENTICATE_ONLY RADIUS_CALLBACK_NAS_PROMPT

RADIUS_FRAMED_PROTOCOL ( int )

Framed Protocol, one of:

RADIUS_PPP RADIUS_SLIP RADIUS_ARAP RADIUS_GANDALF RADIUS_XYLOGICS

RADIUS_FRAMED_IP_ADDRESS ( string )

IP-Address

RADIUS_FRAMED_IP_NETMASK ( string )

Netmask

RADIUS_FRAMED_ROUTING ( int )

Routing

RADIUS_FILTER_ID ( string )

Filter ID

RADIUS_FRAMED_MTU ( int )

MTU

RADIUS_FRAMED_COMPRESSION ( int )

Compression, one of:

RADIUS_COMP_NONE RADIUS_COMP_VJ RADIUS_COMP_IPXHDR

RADIUS_LOGIN_IP_HOST ( string )

Login IP Host

RADIUS_LOGIN_SERVICE ( int )

Login Service

RADIUS_LOGIN_TCP_PORT ( int )

Login TCP Port

RADIUS_REPLY_MESSAGE ( string )

Reply Message

RADIUS_CALLBACK_NUMBER ( string )

Callback Number

RADIUS_CALLBACK_ID ( string )

Callback ID

RADIUS_FRAMED_ROUTE ( string )

Framed Route

RADIUS_FRAMED_IPX_NETWORK ( string )

Framed IPX Network

RADIUS_STATE ( string )

State

RADIUS_CLASS ( int )

Class

RADIUS_VENDOR_SPECIFIC ( int )

Vendor specific attribute

RADIUS_SESSION_TIMEOUT ( int )

Session timeout

RADIUS_IDLE_TIMEOUT ( int )

Idle timeout

RADIUS_TERMINATION_ACTION ( int )

Termination action

RADIUS_CALLED_STATION_ID ( int )

Called Station Id

RADIUS_CALLING_STATION_ID ( string )

Calling Station Id

RADIUS_NAS_IDENTIFIER ( int )

NAS ID

RADIUS_PROXY_STATE ( int )

Proxy State

RADIUS_LOGIN_LAT_SERVICE ( int )

Login LAT Service

RADIUS_LOGIN_LAT_NODE ( int )

Login LAT Node

RADIUS_LOGIN_LAT_GROUP ( int )

Login LAT Group

RADIUS_FRAMED_APPLETALK_LINK ( int )

Framed Appletalk Link

RADIUS_FRAMED_APPLETALK_NETWORK ( int )

Framed Appletalk Network

RADIUS_FRAMED_APPLETALK_ZONE ( int )

Framed Appletalk Zone

RADIUS_CHAP_CHALLENGE ( string )

Challenge

RADIUS_NAS_PORT_TYPE ( int )

NAS port type, one of:

RADIUS_ASYNC RADIUS_SYNC RADIUS_ISDN_SYNC RADIUS_ISDN_ASYNC_V120 RADIUS_ISDN_ASYNC_V110 RADIUS_VIRTUAL RADIUS_PIAFS RADIUS_HDLC_CLEAR_CHANNEL RADIUS_X_25 RADIUS_X_75 RADIUS_G_3_FAX RADIUS_SDSL RADIUS_ADSL_CAP RADIUS_ADSL_DMT RADIUS_IDSL RADIUS_ETHERNET RADIUS_XDSL RADIUS_CABLE RADIUS_WIRELESS_OTHER RADIUS_WIRELESS_IEEE_802_11

RADIUS_PORT_LIMIT ( int )

Port Limit

RADIUS_LOGIN_LAT_PORT ( int )

Login LAT Port

RADIUS_CONNECT_INFO ( string )

Connect info

RADIUS_ACCT_STATUS_TYPE ( int )

Accounting status type, one of:

RADIUS_START RADIUS_STOP RADIUS_ACCOUNTING_ON RADIUS_ACCOUNTING_OFF

RADIUS_ACCT_DELAY_TIME ( int )

Accounting delay time

RADIUS_ACCT_INPUT_OCTETS ( int )

Accounting input bytes

RADIUS_ACCT_OUTPUT_OCTETS ( int )

Accounting output bytes

RADIUS_ACCT_SESSION_ID ( int )

Accounting session ID

RADIUS_ACCT_AUTHENTIC ( int )

Accounting authentic, one of:

RADIUS_AUTH_RADIUS RADIUS_AUTH_LOCAL RADIUS_AUTH_REMOTE

RADIUS_ACCT_SESSION_TIME ( int )

Accounting session time

RADIUS_ACCT_INPUT_PACKETS ( int )

Accounting input packets

RADIUS_ACCT_OUTPUT_PACKETS ( int )

Accounting output packets

RADIUS_ACCT_TERMINATE_CAUSE ( int )

Accounting terminate cause, one of:

RADIUS_TERM_USER_REQUEST RADIUS_TERM_LOST_CARRIER RADIUS_TERM_LOST_SERVICE RADIUS_TERM_IDLE_TIMEOUT RADIUS_TERM_SESSION_TIMEOUT RADIUS_TERM_ADMIN_RESET RADIUS_TERM_ADMIN_REBOOT RADIUS_TERM_PORT_ERROR RADIUS_TERM_NAS_ERROR RADIUS_TERM_NAS_REQUEST RADIUS_TERM_NAS_REBOOT RADIUS_TERM_PORT_UNNEEDED RADIUS_TERM_PORT_PREEMPTED RADIUS_TERM_PORT_SUSPENDED RADIUS_TERM_SERVICE_UNAVAILABLE RADIUS_TERM_CALLBACK RADIUS_TERM_USER_ERROR RADIUS_TERM_HOST_REQUEST

RADIUS_ACCT_MULTI_SESSION_ID ( string )

Accounting multi session ID

RADIUS_ACCT_LINK_COUNT ( int )

Accounting link count

RADIUS_VENDOR_MICROSOFT ( int )

Microsoft specific vendor attributes ( RFC 2548 ), one of:

RADIUS_MICROSOFT_MS_CHAP_RESPONSE RADIUS_MICROSOFT_MS_CHAP_ERROR RADIUS_MICROSOFT_MS_CHAP_PW_1 RADIUS_MICROSOFT_MS_CHAP_PW_2 RADIUS_MICROSOFT_MS_CHAP_LM_ENC_PW RADIUS_MICROSOFT_MS_CHAP_NT_ENC_PW RADIUS_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY RADIUS_MICROSOFT_MS_MPPE_ENCRYPTION_TYPES RADIUS_MICROSOFT_MS_RAS_VENDOR RADIUS_MICROSOFT_MS_CHAP_DOMAIN RADIUS_MICROSOFT_MS_CHAP_CHALLENGE RADIUS_MICROSOFT_MS_CHAP_MPPE_KEYS RADIUS_MICROSOFT_MS_BAP_USAGE RADIUS_MICROSOFT_MS_LINK_UTILIZATION_THRESHOLD RADIUS_MICROSOFT_MS_LINK_DROP_TIME_LIMIT RADIUS_MICROSOFT_MS_MPPE_SEND_KEY RADIUS_MICROSOFT_MS_MPPE_RECV_KEY RADIUS_MICROSOFT_MS_RAS_VERSION RADIUS_MICROSOFT_MS_OLD_ARAP_PASSWORD RADIUS_MICROSOFT_MS_NEW_ARAP_PASSWORD RADIUS_MICROSOFT_MS_ARAP_PASSWORD_CHANGE_REASON RADIUS_MICROSOFT_MS_FILTER RADIUS_MICROSOFT_MS_ACCT_AUTH_TYPE RADIUS_MICROSOFT_MS_ACCT_EAP_TYPE RADIUS_MICROSOFT_MS_CHAP2_RESPONSE RADIUS_MICROSOFT_MS_CHAP2_SUCCESS RADIUS_MICROSOFT_MS_CHAP2_PW RADIUS_MICROSOFT_MS_PRIMARY_DNS_SERVER RADIUS_MICROSOFT_MS_SECONDARY_DNS_SERVER RADIUS_MICROSOFT_MS_PRIMARY_NBNS_SERVER RADIUS_MICROSOFT_MS_SECONDARY_NBNS_SERVER RADIUS_MICROSOFT_MS_ARAP_CHALLENGE

Quickstart

Howto start?

get a radius resource

configure the library

create the request

put attributes

send the request

receive attributes

close the radius resource (optional)

Take also a look at the examples in this package.

The package contains an example php script. This script demonstrates howto authenticate with radius using PAP or CHAP (md5). If you authenticate with Microsoft Radius servers then its not possible to use CHAP (md5). If you would like to authenticate with Microsoft Servers you have to use MS-CHAPv1 or MS-CHAPv2, but its more complicated, because you need md4, sha1 and des to generate the right data. The enclosed examples demonstrate all authentication-methods, including MS-CHAPv1 and MS-CHAPv2. To get the MS-CHAP to work you need the mcrypt and the mhash extension, starting with version 1.2 of the package, the mcrypt extension is no longer needed.

Contact Information

If you have comments, bugfixes, enhancements or want to help to develop this you can send me a mail at [email protected] . Binaries for Windows can be downloaded from here .

Table of Contents radius_acct_open  -- Creates a Radius handle for accounting radius_add_server  -- Adds a server radius_auth_open  -- Creates a Radius handle for authentication radius_close  -- Frees all ressources radius_config  -- Causes the library to read the given configuration file radius_create_request  -- Create accounting or authentication request radius_cvt_addr  -- Converts raw data to IP-Address radius_cvt_int  -- Converts raw data to integer radius_cvt_string  -- Converts raw data to string radius_demangle_mppe_key  -- Derives mppe-keys from mangled data radius_demangle  -- Demangles data radius_get_attr  -- Extracts an attribute radius_get_vendor_attr  -- Extracts a vendor specific attribute radius_put_addr  -- Attaches an IP-Address attribute radius_put_attr  -- Attaches a binary attribute radius_put_int  -- Attaches an integer attribute radius_put_string  -- Attaches a string attribute radius_put_vendor_addr  -- Attaches a vendor specific IP-Address attribute radius_put_vendor_attr  -- Attaches a vendor specific binary attribute radius_put_vendor_int  -- Attaches a vendor specific integer attribute radius_put_vendor_string  -- Attaches a vendor specific string attribute radius_request_authenticator  -- Returns the request authenticator radius_send_request  -- Sends the request and waites for a reply radius_server_secret  -- Returns the shared secret radius_strerror  -- Returns an error message

Related Function(s)

radius_acct_open()

radius_add_server()

radius_auth_open()

radius_close()

radius_config()

radius_create_request()

radius_cvt_addr()

radius_cvt_int()

radius_cvt_string()

radius_demangle_mppe_key()

radius_demangle()

radius_get_attr()

radius_get_vendor_attr()

radius_put_addr()

radius_put_attr()

radius_put_int()

radius_put_string()

radius_put_vendor_addr()

radius_put_vendor_attr()

radius_put_vendor_int()

radius_put_vendor_string()

radius_request_authenticator()

radius_send_request()

radius_server_secret()

radius_strerror()